HONDA marine BF115J Owner's Manual page 85

Under normal conditions, the boat
will perform best when the
antiventilation plate is level with the
water surface.
When cruising into a high wind, trim
the outboard motor down slightly to
level the boat and improve stability.
With a tail wind, trim the outboard
motor up slightly.
Excessive trim/tilt angle during
operation can cause propeller
ventilation, overheating, and water
pump damage.
Flush-Mount Type (DBW type)
POWER
TRIM/TILT
SWITCH
Single Top-Mount Type (DBW type)
POWER
TRIM/TILT
SWITCH
Dual Top-Mount Type (DBW type)
POWER
TRIM/TILT
SWITCH
OPERATION
Side-Mount Type
POWER TRIM/TILT SWITCH
Flush-Mount Type
(Mechanical wire type)
POWER TRIM/TILT SWITCH
83