5. Reinstall the junction box lid, and
the engine cover.
6. Reconnect the battery.
Never use a fuse with a rating greater
than specified. Serious damage to the
electrical system could result.
If a blown fuse is found, try to
determine and correct the electrical
problem that caused the blown fuse.
An uncorrected electrical problem
may cause the fuse to blow again.
If fuses continue to blow, take the
outboard motor to an authorized
Marine dealer for inspection and
service, or refer to the shop manual.
TAKING CARE OF UNEXPECTED PROBLEMS
3 A Fuse
3 A FUSE
FUSE CASE LID
1. Stop the engine and disconnect the
battery cable.
2. Remove the engine cover.
3. Remove the fuse case lid.
4. Remove the old fuse.
5. Install a new fuse. The outboard
motor is supplied with spare fuse in
the junction box lid.
FUSE RATING: 3 A
6. Be sure the fuse case lid is securely
locked.
7. Reinstall the engine cover.
8. Reconnect the battery.
ACG Fuse
FUSE HOLDER
SPARE FUSE (100 A)
FUSE (100 A)
1. Stop the engine and disconnect the
battery cable.
2. Remove the engine cover.
3. Remove the junction box lid.
4. Remove the old fuse by removing
two 5 mm screws.
133