OPERATION
Flush-Mount Type (DBW type)
NEUTRAL
REMOTE
CONTROL
LEVER
Top-Mount Type (DBW type)
NEUTRAL
REMOTE
CONTROL
LEVER
2. Set the control lever in the N
(neutral) position.
The engine will not start if the F
(forward) or R (reverse) gears are
engaged.
64
(Normal Key without START/
STOP Switch Type)
OFF
IGNITION SWITCH KEY
3. Turn the ignition switch key to the
NEUTRAL
START position until the engine
starts.
When the engine starts, release the
key, allowing it to return to the ON
position.
Go to step 5.
NEUTRAL
• Do not turn the IGNITION
switch key to the START position
while the engine is running.
ON
START
(Normal Key with START/STOP
Switch Type)
ON
OFF
POWER SWITCH
3. Insert the key to the power switch
and turn it to the ON position.
4. Push the start/stop switch.
START/STOP
SWITCH