Table of Contents
Advertisement
OPERATION
STEERING
Steer the boat in the same manner as
an automobile.
82
CRUISING
Engine Speed
For best fuel economy, limit the
throttle opening to 80%. Use the
throttle friction control (p. 82) to help
you hold a steady speed.
For rough water conditions or large
waves, slow down to prevent the
propeller from rising out of the water.
The engine is equipped with a rev
limiter to prevent the possibility of
mechanical damage from excessive
engine speed.
If, for example, the outboard motor is
tilted excessively or propeller
ventilation occurs during a sharp turn,
the engine may overrev, activating
the rev limiter.
If engine speed becomes unstable at
high speed due to activation of the rev
limiter, reduce speed and check the
trim angle of the outboard motor.
Trim
Use the power trim/tilt switch to trim
the outboard motor for the best
performance and stability.
You can use the power trim/tilt switch
at any time, whether the boat is
underway or stopped.
Press the UP or DN (down) side of
the switch to adjust the angle of the
outboard motor.
Refer to the trim meter (p. 49) for an
indication of whether the outboard
motor is trimmed high or low.
It is necessary to trim the angle of the
outboard motor to compensate for
changes in boat load, weight
distribution, water conditions, or
propeller selection.
Advertisement
Table of Contents
