Table of Contents
Advertisement
2. Place a suitable container below the
oil drain guide to catch the used oil,
and then remove the oil filler cap,
drain bolt, and sealing washer.
3. Allow the used oil to drain
completely. Use a new sealing
washer, and then reinstall the
engine oil drain bolt and washer.
Tighten the drain bolt securely.
SERVICING YOUR OUTBOARD MOTOR
TIGHTENING TORQUE:
17 lbf·ft (23 N·m, 2.3 kgf·m)
Improper disposal of engine oil can
be harmful to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do not
throw it in the trash, pour it on the
ground or down a drain.
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p. 99)
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
6.9 US qt (6.5 L)
With oil filter change:
7.1 US qt (6.7 L)
5. Install the oil filler cap and tighten
it securely.
6. Install and lock the engine cover
(p. 97).
101
Advertisement
Table of Contents
