Table of Contents
Advertisement
S p e c i a l F e a t u r e s
Edge to Edge
For those instances when you need to print PCL 5e Emulation
(hereafter referred to as PCL) jobs all the way to the edge of
Printing
the page, turn on the Edge to Edge option in the PCL Emulat
Menu. Edge to edge printing is always available for
PostScript jobs and requires no setting. Just format your
document to the edge of the page.
See Chapter 3: Using the Control Panel for instructions on
changing Control Panel settings.
Automatic Tray
The DocuPrint 4517 allows you to set automatic tray
switching for both PCL and PostScript (when PostScript is
Switching
installed) jobs. When tray switching is on, and the paper tray
runs out of paper, the printer automatically switches to
another paper tray (if another tray is loaded with the same
size paper). That means you don't have to load paper as often.
You can also install one or two optional 500-sheet Paper Deck
and Cassettes (lower trays), or the 2,000-sheet High Capacity
Feeder, to extend your printing capacity.
For more information on tray switching, see the section
"Automatic Tray Switching" (page 2-18) in Chapter 2: Paper
Handling.
Automatic
When you have installed the PostScript option, the printer can
process both PCL and PostScript jobs. When the printer's
Language Sensing
Language Sensing option is on, the DocuPrint 4517 samples
and Switching
the incoming data stream to determine which language the
print job requires. The DocuPrint 4517 then switches to the
proper language for that job.
The DocuPrint 4517 can have up to three active ports when
you install two optional network interface cards. Turn the
Language Sensing option on for all the ports, and the printer
automatically samples each print job and switches to the
appropriate processing language.
For more information about language sensing and switching,
see Appendix D: Control Panel Options.
C h a p t e r 1 : D o c u P r i n t 4 5 1 7 Q u i c k T o u r
1-7
Advertisement
Table of Contents
Troubleshooting
