Xerox DocuPrint 4517 User Manual page 247

Table D.1 Control Panel menu options, settings, and descriptions (continued)
Menu Option,
Location(s),
Setting(s)
Port Enable
Parallel Menu
Serial Menu
LocalTalk Menu
Ethernet Menu
Token Ring Menu
Off
On*
Port Timeout
Parallel Menu
Serial Menu
LocalTalk Menu
Ethernet Menu
Token Ring Menu
5-999 seconds
30* seconds
†
PostScript Menu
Main Menu
†
Appears only with the
PostScript option installed.
Power Saver
System Menu
Off
120 minutes
90 minutes
60 minutes
30 minutes
15 minutes
Print Density
System Menu
0 - 12
3*
Controls activation of the port.
• When set to On, the port is enabled so that the printer can receive print jobs
through it. The port becomes part of a port polling sequence that includes all
ports.
• When changed from Off to On, the respective NIC is initialized.
• When set to Off, the port is disabled so that no communication with the host
occurs through this port. If you are not using the port, you can set
Enable to Off.
Time interval for determining when to end an incomplete print job and poll the
next port in the polling sequence.
This option works in conjunction with
Hold Up or Down
scrolls in increments of 10.
Invokes the PostScript Menu.
The DocuPrint 4517 conforms to EPA Energy Star guidelines. The printer will enter
a low power state after the specified period of inactivity. This timeout is adjustable
to 15, 30, 60, 90, or 120 minutes via this option.
When in the low power state, the printer displays
Control Panel. When a print job is received while in the Power Saver mode, the
printer may require up to 70 seconds of warm-up time before the first sheet is fed
from the input tray.
Controls the density of the image printed on the page. The lower the setting, the
lower the density; the higher the number, the higher the print density.
Changing the default setting can adversely affect gray shading, line
sharpness and Toner Saving. Change this setting with caution.
A p p e n d i x D : C o n t r o l P a n e l O p t i o n s
C o n t r o l P a n e l O p t i o n s
Description
Auto Job End (page D-3).
for approximately two seconds and
Power Saver On
Port
Port Timeout
on the
Table D.1 Page 15 of 21
D-17