U s i n g t h e M a i l b o x / C o l l a t o r
2-26
D o c u P r i n t 4 5 1 7
reason, Xerox recommends you either enable or disable
passwords for both bins and collator.
•
If you plan to use passwords for bins, also set a password
for collator mode. Distribute individual bin passwords to
the appropriate users. Do not distribute the password for
collator mode.
•
If you plan to use a password for collated jobs, also set
passwords for each bin. Distribute the collator password
to the appropriate users. Do not distribute individual bin
passwords.
See "Enabling Passwords" (below) and "Disabling
Passwords" (page 2-28) for instructions.
Enabling Passwords
Follow the instructions below to set passwords.
1
Power ON the printer.
The printer will complete its self-test and display the
following message at the Control Panel Display:
Online
Ready
2
Press Online
, then Menu
Main Menu
Language
3
Press Down
until you see:
Main Menu
Mailbox Menu
4
Press Enter
and the display changes to:
Mailbox Menu
Collator
To set a collator password, continue to Step 5.
To set a bin password, skip to Step 6.
/
4 5 1 7 m p U s e r G u i d e
and you will see: