Xerox DocuPrint 4517 User Manual page 202

2 , 0 0 0 - s h e e t H i g h C a p a c i t y F e e d e r ( H C F )
4
Reach into the HCF from below and fit
the HCF connector firmly into the
printer's receptacle, aligning the tab on
the connector with the notch in the
receptacle.
If a Mailbox/Collator is installed on the
printer, go to Step 6. If not, go to Step 7.
C-34 D o c u P r i n t 4 5 1 7
5
6
/
4 5 1 7 m p U s e r G u i d e
Reach into the HCF from below and fit
the HCF connector firmly into the paper
deck's receptacle, aligning the tab on the
connector with the notch in the
receptacle.
If a Mailbox/Collator is installed on the
printer, go to Step 6. If not, go to Step 7.
Attach the power cords as follows:
A
Attach the Mailbox/Collator short
power cable (1) between the printer
and the Mailbox/Collator.
B
Attach the HCF short power cable (2)
between the Mailbox/Collator and the
HCF.
C
Attach the long power cord (3)
between the HCF and the power
source.
D
Skip to Step 8.