Xerox DocuPrint 4517 User Manual page 127

Table 6.2 Control Panel messages (continued)
Message
Waiting...
Warming Up
Please Wait...
Warning: Disk
Data To Be Lost
Description/Corrective Action
The printer was busy processing data from a host but the print job was not
completed.
This message appears until:
• Another print job is received.
• The Port Timeout expires and Auto Job End is On.
• The last page timeout expires.
• The PostScript "waittimeout" expires.
ACTION: If using Hex Dump mode, press Online
The Fuser has not warmed up yet.
Message disappears when the printer is ready. The message displays at power-on
and may display after the cover has been opened for some time or when the
printer is exiting Power Saver mode.
ACTION: None.
The Format The Disk option has been selected.
ACTION: Press Up to format the disk or press Down
C o n t r o l P a n e l M e s s a g e s
C h a p t e r 6 : T r o u b l e s h o o t i n g
, then Form Feed .
to abort.
Table 6.2 Page 22 of 22
6-27