Mailbox/Collator; Installing The Mailbox/Collator - Xerox DocuPrint 4517 User Manual

I n s t a l l i n g a n d R e m o v i n g P r i n t e r O p t i o n s
Mailbox/
Collator
Note
Installing the

Mailbox/Collator

1
Power OFF the printer and disconnect the power cord.
2
Open the rear cover.
C-44 D o c u P r i n t 4 5 1 7
This section contains two sets of instructions:
• "Installing the Mailbox/Collator" (below)
• "Removing the Mailbox/Collator" (page C-47)
Refer to the section "Using the Mailbox/Collator" (page 2-24)
for usage instructions. Also, the Mailbox/Collator User Guide
that came with the Mailbox/Collator contains more detailed
information about configuring and using the Mailbox/
Collator.
3
/
4 5 1 7 m p U s e r G u i d e
Remove the option interface cover by
feeling for its tabs from the underside and
pushing up on them. (This may require
some force.) Then close the rear cover.
Keep the option interface cover in a
safe place. You will need to replace
it if you ever remove the option.