Table of Contents
Advertisement
4
Unpack the Mailbox/Collator and grasp
it by the front and rear hand holds.
Do not allow the rear door of the
Mailbox/Collator to open.
If you must set the Mailbox/Collator
down, lay it on its right side (the
side showing in the picture above).
A p p e n d i x C : I n s t a l l i n g a n d R e m o v i n g P r i n t e r O p t i o n s
5
There is a positioning hook on the
underside of the Mailbox/Collator. Insert
it into the outermost slit in the exhaust
grill on top of the printer.
To avoid damage to the positioning
hook, do not twist the Mailbox/
Collator to the right or left while
lowering it into position.
6
Gently guide the Mailbox/Collator down
to the printer, aligning the Mailbox/
Collator connector plug with the
receptacle in the printer.
Make sure the Mailbox/Collator is
firmly seated.
M a i l b o x / C o l l a t o r
C-45
Advertisement
Table of Contents
Troubleshooting
