Xerox DocuPrint 4517 User Manual page 181

4
Carefully pull out on the locking clips to
release the PostScript SIMM.
A p p e n d i x C : I n s t a l l i n g a n d R e m o v i n g P r i n t e r O p t i o n s
5
Rotate the PostScript SIMM up to a
vertical position, then lift it out.
6
Replace the controller board, sliding it
along the alignment channels. Then
hand-tighten the thumb screws.
7
Replace the power and interface cables
and power ON the printer.
After warming up for a few minutes, the
Control Panel displays the following
message:
Online
Ready
If any other message is displayed, see
Table 6.2 starting on page 6-6.
8
Press Online , then Reset
see:
Reset Menu
Reset Printer
9
Press Down and you see:
Reset Menu
Reset Menus
P o s t S c r i p t S I M M
and you
C-13