L o a d i n g P a p e r
Using the
High Capacity
Feeder
Note
Caution
1
Open the paper drawer, and wait until
tray fully lowers.
If you are not changing paper size, go to
Step 3 on page 2-15. Otherwise, continue
to Step 2.
2-14
D o c u P r i n t 4 5 1 7
The optional High Capacity Feeder (HCF) holds 2,000 sheets
2
of 20 lb (75 g/m
) paper. Refer to the section "Selecting
Paper" (page 2-3) for acceptable paper sizes and weights.
(See Appendix A for ordering information and Appendix C
for installation instructions.)
When the HCF is installed, it can be accessed using your
existing applications/drivers as a "Lower Tray."
• Do not attempt to load the High Capacity Feeder during
printing.
• Do not overfill the feeder.
2
/
4 5 1 7 m p U s e r G u i d e
Adjust the end and side paper guides for
paper size.
Ensure that both the top and bottom of the
paper guides are seated into the correct
size slots.