Xerox DocuPrint 4517 User Manual page 271

Table G.4 4517 Download Macro Command Format
< E S C > < S O H > < S T X > M A C R O L < l o c > , < m a c r o _ i d > , < l e n > , < m a c r o _ d a t a > < E T X >
where
<ESC> is the ascii ESC character, 1B hexadecimal
<SOH> is the ascii SOH character, 01 hexadecimal
<STX> is the ascii STX character, 02 hexadecimal
<loc> is DC for disk, or
C0 for Upper Card, or
C1 for Lower Card
<macro_id> is an ID number between 0 and 32767 (=2**15-1), inclusive. This is the ID by which the
application references the macro.
<len> is the length of the macro data in bytes. Value allowed between 1 and 4294967294 (=2**32-2)
inclusive. The length does not include the <ETX> following the macro data.
<macro_data> is the macro text. This text does not include the start macro definition command
(<ESC>&f0X) or the stop macro definition command (<ESC>&f1X)
<ETX> is the ascii ETX character, 03 hexadecimal
Table G.5 4517 Delete Macro Command Format
< E S C > < S O H > < S T X > M A C R O D < l o c > , < m a c r o _ i d > , < E T X >
where
<ESC> is the ascii ESC character, 1B hexadecimal
<SOH> is the ascii SOH character, 01 hexadecimal
<STX> is the ascii STX character, 02 hexadecimal
<loc> is DC for disk, or
C0 for Upper Card, or
C1 for Lower Card
<macro_id> is an ID number between 0 and 32767 (=2**15-1), inclusive. This is the ID by which the
application references the macro.
<ETX> is the ascii ETX character, 03 hexadecimal
A p p e n d i x G : D o c u P r i n t 4 5 1 7 U n i q u e P r i n t e r C o m m a n d s
Tables G.4 to G.6 provide the macro commands for
downloading and deleting macros.
P C L M a c r o C o m m a n d s
G-9