Default Source Mapping Settings; Customizing Source Mapping Settings - Xerox DocuPrint 4517 User Manual

Table 2.5

Default Source Mapping settings

PCL Paper Source Configuration
Upper
Manual
Manual Envelope
Lower
Large Capacity
Envelope Feeder
† These will default the same as the appropriate Lower Tray column if both Lower Tray(s) and Envelope Feeder are installed.
Caution
Default Source Mapping Settings
Table 2.5 shows the Source Mapping settings in effect with
the base printer, as well as those when one or two Lower
Trays are installed.
Base One
Lower Tray
Main Tray Main Tray
Front Tray Front Tray
Front Tray Front Tray
Main Tray Lower 1 Tray
Main-Front Lower 1-Main
Front Tray Front Tray

Customizing Source Mapping Settings

You may change the Source Mapping settings to best fit your
printing needs. For example, you may want the printer to
automatically feed from the front tray when the main tray
becomes empty. The Source Mapping examples shown next
in this guide can help you customize Source Mapping
settings for your printing environment.
Customizing your Source Mapping settings on the printer
may cause different trays to be used than are selected in your
printer drivers.
A u t o m a t i c T r a y S w i t c h i n g
Two
Lower Trays
Main Tray
Front Tray
Front Tray
Lower 2 Tray
Lwr1-Lwr2-Main
Front Tray
C h a p t e r 2 : P a p e r H a n d l i n g
Envelope
Feeder
Main Tray
Front Tray
Envelope Feeder
†
Main Tray
†
Main-Front
Envelope Feeder
2-21