Installing The 2,000-Sheet High Capacity Feeder - Xerox DocuPrint 4517 User Manual

Installing the
2,000-sheet High
Capacity Feeder
1
Power OFF the printer and disconnect all cables and cords.
Note: If you have options attached to the printer, such as a Mailbox/Collator, Offset Catch
Tray or 500-Sheet Paper Deck, you may need another person to assist you with the
installation.
2
Hold the printer with its front facing you
and stand in front of the HCF. Align the
front right corners of the printer and HCF
as you lower the printer onto the HCF.
A p p e n d i x C : I n s t a l l i n g a n d R e m o v i n g P r i n t e r O p t i o n s
2 , 0 0 0 - s h e e t H i g h C a p a c i t y F e e d e r ( H C F )
3
Set the printer down onto the HCF so that
the HCF's pins insert into the bottom of
the printer. The front and right sides of
the printer should be flush with the front
and right sides of the HCF.
If connecting directly to the printer,
continue with Step 4.
If a 500-Sheet Paper Deck is being
installed with the HCF, go to Step 5.
C-33