Defining The Ips Gateway Queue; Managing The Print Queue - Xerox DocuPrint 100MX User Manual
Xerox docuprint 100mx: users guide
Hide thumbs
Also See for DocuPrint 100MX:
- Security manual (38 pages) ,
- Brochure (4 pages) ,
- Install manual (2 pages)
Table of Contents
Advertisement
Defining the IPS Gateway queue
Managing the print queue
IPS Gateway User's Guide (5/2002)
This section provides instructions on:
•
Naming a printer queue on DocuSP to receive the PostScript file
generated by IPS Gateway
•
Defining the queue as either a spooling or a streaming queue
To define the queue:
Step 1.
On the DocuSP window, log on as Trusted User or System Administrator.
Step 2.
Select the Queue Manager icon.
Step 3.
In the lower right corner of the Queue Manager window, select New
Queue to display the New Queue window.
Step 4.
In the Queue area of the New Queue window, enter the Queue Name to
be used for IPS Gateway jobs.
Step 5.
In the Input area, choose Streaming or Spooling for the queue type. See
"Spooling versus streaming
Step 6.
Leave all other parameters as the defaults. Click Add to add the queue,
then Close to close the New Queue window.
The IPDS data streams processed by IPS Gateway are sent to the IPS
Gateway print queue established on DocuSP. Use the Queue Manager on
the DocuSP window to view the queue and to manage and release jobs
sent from IPS Gateway. For more information on how to use the Queue
Manager, refer to the DocuSP System Guide.
Installation and setup
queue" for more information.
2-10
Advertisement
Table of Contents
