Trace; Restart Ips Gateway - Xerox 6100BD - Phaser Color Laser Printer User Manual

IPDS User Guide
entire font list will be printed.
• Import Fonts from CD: The Manage Font Dialog will allow you
to load fonts from an IBM® formatted font CD. FreeFlow®
Print Server IPDS is only able to import AFP Outline fonts from
CD.
• Eject CD: This option allows you to tell the system to eject a
CD.

Trace

Trace information is useful for diagnosing and correcting problems
with the Xerox FreeFlow® Print Server IPDS software. A trace file
must be part of the set of diagnostic files provided with an outload
file.
NOTE: If you experience a problem with the IPS Manager, such
as a channel connectivity problem, that you cannot correct,
contact your local Xerox customer support representative for
assistance.
The IPS Manager diagnostic trace functions allow you to capture
or replay a trace of the IPDS data stream, or to capture diagnostic
messages within the IPS Manager log files while the print server is
processing a data stream. The Xerox service representative
performs trace functions, but you may be asked to perform one or
more of the trace functions in preparation for a service call.
System administrator access is required to access and use the
trace functions.
• Capture trace: Captures IPDS data in a file as the data is
being received from the host. The trace file also contains any
reply data that the printer has sent to the host. The trace file is
stored in the /opt/XRXnps/XRXipds/ipdstraces directory.
• Playback trace: Plays back the previously captured trace file.
The trace file can also be printed. When a trace file is selected
for playback, the system automatically disconnects from the
host, and reconnects when the playback is complete.
NOTE: During a trace capture or playback, the job settings, tray
mappings, and stacker mappings are not available and cannot be
changed until the trace activity is complete.

Restart IPS Gateway

Selecting the Restart IPS Gateway initiates a new communication
session with the host without restarting the print server. If
selected while an IPDS job is active, the host will resend the job
starting with page 1 or from its last checkpoint.
Using Xerox FreeFlow® Print Server IPS Manager
3- 5