Socket Gateway Connection; Enhanced Font Support - Xerox DocuPrint 100MX User Manual

IPS Gateway User's Guide (5/2002)

Socket Gateway Connection

The Socket Gateway Connection area displays the TCP/IP Socket
Gateway port that IPS Gateway uses when submitting jobs to DocuSP.
To specify the TCP/IP Socket Gateway port:
Step 1. From the Port drop-down box in the Socket Gateway Connection area,
select the port number that matches the port number assigned to the
queue on DocuSP where IPDS jobs will be spooled. Valid values are 1024
through 65535.
NOTE: For information on specifying the port in DocuSP, see
"Defining the IPS Gateway
Step 2. Click Save to save your setting and reset IPDS as indicated; see
"Important setup

Enhanced Font Support

Enhanced Font Support is an extension of the printer-resident outline font
support in IPS Gateway. It provides support for host environments that
expect resident outline font substitution for raster fonts.
When you load supported resident outline fonts on the printer, this feature
is enabled. It can be disabled if you need resident outline font support but
do not need raster font substitution.
When enabled, if the host requests a raster font, IPS Gateway substitutes
an equivalent resident outline font if one is available. If the host requests
a font for which there is no resident outline font match or equivalent, the
default resident outline font is used.
When disabled, no font substitution occurs. Requests for fonts that are
resident are honored; all other fonts must be downloaded. The default
resident outline font is used only when specifically requested by the host.
See "Loading IBM AFP resident outline
of resident outline font and raster font substitution support.
To enable or disable Enhanced Font Support:
Step 1. In the Enhanced Font Support area, select either Enable or Disable,
according to your resident outline font requirements.
NOTE: The Enhanced Font Support area is only accessible when
resident outline fonts are loaded.
Step 2. Click Save to save your setting and reset IPDS as indicated; see
"Important setup
Step 3. Drain and restart the printer at the host for the change to take effect.
queue."
instructions" for more information.
instructions" for more information.
IPS Gateway operation
fonts" for a complete description
3-13