Uninstalling Ips Gateway - Xerox DocuPrint 100MX User Manual

Uninstalling IPS Gateway

IPS Gateway User's Guide (5/2002)
At some point you may need to remove the IPS Gateway software (for
example, if you have a trial version of the software installed on your
workstation and the temporary license has expired). Use the uninstall
program on the installation CD to remove all IPS Gateway files from the
printer controller. These components are removed:
• IPS Gateway license
• IPS Gateway packages (application and configuration files)
This program does not remove the IPS Gateway print queue. If you no
longer need the queue, use the DocuSP Queue Manager to delete it.
Refer to the DocuSP System Guide for instructions on deleting a queue.
Once uninstalled, if you want to use IPS Gateway again, reinstall it from
the CD.
To run the uninstall program:
Step 1. Exit IPS Gateway if it is running; see
Step 2. Log on as root.
Step 3. Place the IPS Gateway installation CD into the CD-ROM drive.
Step 4. If Volume Manager is running on your workstation, a window labeled "File
Manager - cdrom" appears on the desktop asking for the path to your
CDROM driver. Close the File Manager - cdrom window.
Step 5. Open a terminal window and change to this directory, or to wherever your
CD-ROM directory resides, by entering this command:
cd /cdrom/cdrom0
Step 6. Enter this command to start the uninstall program:
./uninstall.sh
NOTE: The uninstall program terminates any IPS Gateway services
or jobs that are running.
Step 7. You are asked to confirm that you want to remove the IPS Gateway
software. Enter y to confirm the removal operation or n to cancel the
procedure.
If you enter "n," the program stops and returns you to a command prompt
on the terminal window. IPS Gateway remains unchanged.
Installation and setup
"Exiting IPS Gateway" for instructions.
2-18