Customer Job Accounting; Resolution And Performance; Specifying Margins - Xerox DocuPrint 100MX User Manual

Resolution and performance

Specifying margins

IPS Gateway User's Guide (5/2002)

Customer job accounting

When using job segmentation, the printer tracks each segment as a
separate job in the Customer Accounting Log. For example, if you have a
5000 page job and specify a value of 50 in the Segmentation option, the
printer records 100 entries in the Customer Accounting Log.
If the Customer Accounting Log reaches the maximum log size value, the
oldest record is deleted for each new record added. The minimum log size
is 282 and the maximum size is 1000. The log is set to a default of 400
entries at DocuSP installation.
Because job segmentation can cause the log to fill up, you may want to
print or export the log data more frequently if your site uses the data for
billing purposes.
Before using segmentation, review the log size for your printer and
increase the value, if necessary, to help ensure that the log does not fill.
You must be logged onto the printer as System Administrator to make any
changes to the log size.
To change the log size:
Step 1. Select the Administration icon from the DocuSP window, then select the
Accounting tab.
Step 2. In the Accounting tab, select Options to display the Accounting Options
window.
Step 3. In the Logging area, specify the desired maximum log size.
IPS Gateway allows documents to be printed at either 300 or 600 dots per
inch (dpi) using the Output Resolution option. See
"Output Setup
Selecting 600 dpi output may improve print quality but may reduce system
throughput for complex applications that require scaling.
NOTE: Ensure that the output resolution on the IPDS Setup tab in IPS
Gateway matches the resolution on the PostScript/PDF tab under the
queue properties in DocuSP. Otherwise, performance may be impacted.
When migrating applications from other Xerox or IBM IPDS devices, there
may be small differences in page positioning due to differences in the
imaging hardware.
Use the Image Shift option in DocuSP to make small adjustments to the
page image position, for example to match pre-printed forms. Refer to the
DocuSP System Guide for information on shifting images.
tab" for instructions on setting resolution.
Getting started
"IPDS Setup tab" and
1-8