Segmentation; Rotation - Xerox DocuPrint 100MX User Manual

IPS Gateway User's Guide (5/2002)

Segmentation

The Segmentation option allows you to divide a large job into a series of
smaller jobs or segments. For normal job processing, job segmentation
should be inactive. However, Xerox recommends that you use job
segmentation for any spooled job over 500 pages. Before using this
option, review the "Segmentation" processing considerations.
To enable job segmentation:
Step 1. In the Segmentation area, select Enable.
Step 2. In the drop-down box, specify a value from 50 to 500 for the number of
pages that you want each job segment to contain.
Step 3. Click Save to save your settings and reset IPDS as indicated; see
"Important setup

Rotation

Use the Rotation option when migrating continuous forms jobs to IPS
Gateway. Enabling this option tells IPS Gateway to print jobs that were
designed for a continuous form printer on cut-sheet paper, with the
orientation rotated 90 degrees.
For normal cut-sheet or non-continuous form job processing, set this
option to Disable.
If you are sending a mixture of continuous form and cut-sheet jobs to IPS
Gateway, this option must be reset between jobs, or you can batch the
jobs into separate print classes to be controlled by the operator.
Refer to the Xerox manual Solutions Guide for IPDS Printing for details on
continuous form to cut sheet conversion of print jobs for IPS/NPS
applications.
To enable rotation:
Step 1. In the Rotation area, select Enable.
Step 2. Click Save to save your setting and reset IPDS as indicated; see
"Important setup
instructions" for more information.
instructions" for more information.
IPS Gateway operation
3-16