Xerox DocuPrint 100MX User Manual page 48

IPS Gateway User's Guide (5/2002)
Configuring channel connection
The Channel area allows you to identify the unit address and set the
channel speed used in conjunction with the controller to send data to IPS
Gateway from your host computer(s).
To configure channel:
Step 1. In the IPDS Connection area, select Channel.
Step 2. Enter your two-character unit address in the Address (hex) field.
Step 3. In the Speed drop-down box, select one of these speeds:
• Single tag
• High speed
• Data Streaming 1.5
• Data Streaming 3
• Data Streaming 4.5
NOTE: Channel speeds are dictated by the host, host channel
extenders, and other properties of the bus and tag network. See your
systems programmer to determine the appropriate channel speed.
Step 4. Click Save to save your settings and reset IPDS as indicated; see
"Important setup
Step 5. Drain and restart the printer at the host for the changes to take effect.
instructions" for more information.
IPS Gateway operation
3-12