Xerox DocuPrint 100MX User Manual page 21

Step 10.
IPS Gateway User's Guide (5/2002)
Step 8. After the IPS Gateway packages are successfully installed, you are asked
to choose the language for the IPS Gateway user interface. Enter 1 for
English, 2 for French, 3 for German, or 4 for Italian.
NOTE: To change the language of the IPS Gateway user interface,
reinstall the IPS Gateway software.
Step 9. A message appears on the terminal window indicating that the installation
of IPS Gateway is complete. You are prompted to reboot your workstation.
Enter y for the installation program to reboot your workstation or n to end
the installation.
If you enter "n," IPS Gateway installation is not complete until you reboot
your workstation. Refer to the DocuSP System Guide for system reboot
procedures.
Remove the installation CD and store it in a secure area. The IPS
Gateway software is installed.
IPS Gateway is not accessible through the DocuSP menu until the IPS
Gateway feature license is activated and DocuSP is restarted.
Installation and setup
2-5