Xerox DocuPrint 100MX User Manual page 60

SNMP communication fault.
Explanation:
System response:
User action:
Unable to establish socket gateway connection to printer.
Explanation:
System response:
User action:
Job in progress error: Unable to initiate socket gateway connection.
Explanation:
System response:
User action:
Media mismatch detected. Check Media Setup tab.
Explanation:
System response:
User action:
IPDS configuration change(s) detected. Reset IPDS is required.
Explanation:
System response:
User action:
IPS Gateway User's Guide (5/2002)
IPS Gateway was not able to communicate with the printer SNMP services.
IPS Gateway disables UI functions on the Media Setup tab.
Ensure that the printer SNMP services are licensed and active and that
DocuSP is active.
IPS Gateway could not connect to the printer using the socket gateway
information provided in the IPDS Setup tab.
IPS Gateway reattempts to make a socket gateway connection using the
information in the IPDS Setup tab.
Ensure that the socket gateway is correctly defined and active on the printer.
IPS Gateway could not establish a socket gateway connection for the
IPDS job in progress.
IPS Gateway reattempts to make a socket gateway connection using the
information in the IPDS Setup tab.
Ensure that the socket gateway is correctly defined and active on the printer.
IPS Gateway detected that an IPDS tray is using a media definition that
either no longer exists or is no longer loaded on the printer.
The IPS Gateway Media Setup tab highlights (in red) each row of IPDS
trays using an invalid media definition.
Correct and save the IPDS tray mappings to prevent jobs from becoming
ineligible.
IPS Gateway detected changes that require an IPDS reset.
IPDS processing continues. Any configuration changes made do not take
effect until IPDS is reset.
Select Reset IPDS from the IPS Gateway System menu for the changes
to take effect.
Messages
4-2