Default Values - Xerox DocuPrint 100MX User Manual

Default values

Setup option
IPDS Resolution
IPDS Connection (channel or TCP/IP)
Socket Gateway Connection (TCP/IP)
Enhanced Font Support
Output Resolution
Stapling
Segmentation
Rotation
Media Definition(s) (all IPDS trays)
IPS Gateway User's Guide (5/2002)
The default values listed in the table below are active in IPS Gateway
upon installation. Change any of these values from the specified tab.
300 dpi
TCP/IP port 5001
9100
Enabled (if resident AFP outline
fonts are loaded)
300 dpi
None
Disabled
Disabled
US Letter (216 x 279):Plain:White:75
IPS Gateway operation
Initial value Tab location
IPDS Setup
Output Setup
Media Setup
3-9