Verifying Access And Establishing Passwords; User Access Levels - Xerox DocuPrint 100MX User Manual

Verifying access and establishing passwords

User access levels

Walk Up User
Trusted User
System Administrator
IPS Gateway User's Guide (5/2002)
When IPS Gateway is first installed, the default user access level is Walk
Up User. The initial passwords are:
• Trusted User: trust
• System Administrator: administ
Passwords are case-sensitive.
If the installation is being performed by a Xerox Customer Services
Analyst or Engineer, ensure that your system administrator has access to
IPS Gateway before the analyst or engineer leaves the site. Your system
administrator should also change the initial passwords for security
reasons; to do this, follow the procedure in
There are three user levels available to access IPS Gateway, each with
its own level of feature access.
The Walk Up User has limited access rights to IPS Gateway. This is the
access level assigned when IPS Gateway is first started. The Walk Up
User can do the following:
• Log on to IPS Gateway
• Access the Help facility
• Pause and resume IPS printing
• Minimize the IPS Gateway window
This user cannot change any IPS Gateway settings.
The Trusted User requires a password and can perform the same
functions as the Walk Up User. Additionally, the Trusted User can:
• Change and save IPS Gateway settings
• Use the diagnostic functions
• Exit IPS Gateway
The System Administrator requires a password and can perform the same
functions as the Trusted User. Additionally, the System Administrator can:
• Change passwords
• Enter and change software licenses
Installation and setup
"Changing passwords."
2-6