Novell Configuration; Configuring Docuprint As A Pserver - Xerox DocuPrint 92C Installation Planning Manual

Novell configuration

Configuring DocuPrint as a PSERVER

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
Once you decide to configure the DocuPrint NPS as an RPRINTER
or as a PSERVER on your Novell network, there are a number of
tasks you must perform.
The following is a summary of the tasks to perform if the DocuPrint
NPS is configured as a PSERVER:
•
Novell tasks:
— Sign on to the Novell workstation as a network
administrator.
— From PCONSOLE, create a Printer Queue (for example,
Gazette) and a Print Server (for example, PGazette).
Caution: If you use Novell's Quick Setup feature, you must do the
following after creating the queue and server:
— In the definition of the server, choose Printer Setup.
— Define the printer per the naming convention
suggested by NPS.
— Select DEFINED ELSEWHERE.
— From the Print Server window, configure a printer for
PServer using the Printer Configuration option.
— Type any name (for example, Gazette) for the printer.
Select Remote Other/Unknown type for the printer and
save the information.
— Define the printer in the Queue Service by highlighting the
printer name (for example, Gazette) and pressing Enter.
— Press the Insert key to select the Print Queue (for
example, Gazette) you want to bind with PServer (for
example, PGazette).
— Save the information.
•
When configuring NPS, answer the configuration questions as
follows:
— Remote Printer for Novell Netware -- <N>
— Use Print Server for Novell Netware -- <Y>
— Name of Novell Print Server -- PGazette
— IPX Internal Network Number [000000##] (assigned by
network administrator)
— IPX number of Connected LAN [000000##] (assigned by
network administrator)
— Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
DOCUPRINT NPS ON A NOVELL NETWORK
D-7