Table of Contents
Advertisement
Using your WorkCentre as a Copier
(continued)
Customizing your copy output
You can customize your copy output directly from the Control Panel or by
changing the Default Settings in the Copy Features menu as explained
later in this section.
Using the Control Panel
Selections made directly from the control panel are not memorized and will
be lost if you press the Clear button twice, after the time-out set in the
Default menu (Auto Clear Time) or when you switch off your WorkCentre.
C
1. Copy Quality
This feature allows you to select BEST, NORMAL or DRAFT copy quality,
according to the type of output you require (Shown by lights).
DRAFT is possible ONLY if you have selected PLAIN paper.
2. Copy Intensity
This feature enables you to lighten or darken black & white, and saturate or
soften color on the copies you make. It has five values (Shown by lights).
3. Reduction/Enlargement
Preset
Using the FIXED SCALE button, you can select one of the six values
indicated above the button on the control panel (Shown by lights).
100%
one to one copying (default value)
36
Advertisement
Table of Contents
