Table of Contents
Advertisement
Installation
7. The LCD shows ALIGNMENT CONFIRMATION.
The WorkCentre prints another test piece entitled "Alignment
confirmation" and then exits automatically to READY.
This function (ALIGN PRINT HEAD) is generally run from the tool menu; it
can also be operated from the Printer Monitor once the WorkCentre printer
driver is installed (see Printer Monitor), but it must then be followed on the
control panel.
Your WorkCentre is now ready to operate as a copier.
If you want to continue with the installation of the software, go to the
specific section in this User's guide.
Note that if you switch on your PC now, in Windows 95/98 environments a
screen indicating "New Hardware Found" will be displayed. Just press the
Cancel button on this screen.
(continued)
13
Advertisement
Table of Contents
