Using Your Workcentre As A Scanner; Scanner Screens - Xerox WorkCentre Xi70c User Manual

Using your WorkCentre as a Scanner

To use your WorkCentre as a scanner, you must first:
Install it completely (see Installation AND Software Installation)
Make sure that it is switched on and is on-line (the light indicator
between the PC and WorkCentre symbols on the control panel must be
ON and the LCD must show READY TO COPY.
You should now:
1. Open an application (example used: MGI PhotoSuite).
2. Highlight Get Photo From in File on the menu bar and click on Select
Source.
3. Select your WorkCentre scanner from the list of scanners displayed.
4. Highlight Get Photo From in File on the menu bar and click on
Camera/Scanner.
5. The scanner driver opens.
6. You can now scan an original document from your WorkCentre or
acquire an image from a file already loaded in your PC.

Scanner Screens

Your WorkCentre scanner monitor has three pages: Basic, Image Quality
and About.
The Basic page appears automatically after your WorkCentre and graphics
application are started up. The Image Quality and About pages are
hidden; to see them, click on Image Quality and About tabs at the top of
the scanner application screen.
For a full description of all the features on these three screen pages and
further information on your scanner, access the On Line Help file in the
scanner driver and consult the documentation supplied with your specific
scanner application program.
49