Table of Contents
Advertisement
Software Installation
DOS environment
Although optimized for operation in a Windows
will also operate in DOS, recognizing PCL III + command codes. This
means that you can print from any DOS application that supports this
command code set.
The installation CD supplied with your printer also contains a printer set-
up utility program (CONFIG.EXE), which allows you to personalize the
printer settings, if your application driver does not already contain the
settings you require.
The programmable features available through CONFIG.EXE are the
following:
Parameter
(Identifier)
PaperFormat
PerSkip
TextScale
Bimdensity
Terminator
Quality
WidthType
TypeStyle
26
(continued)
A4, A5, US Letter, US Legal, US Executive,
COM-10, DL, C6, C5, B6
User-defined: min. 4 x 5.8 in; max. 8.5 x 14 in
Off (no bottom margin - BOF)
On (BOF = 12.7 mm)
Off
On
75, 150, 300 (dots per inch)
Normal (CR=CR;LF=LF;FF=FF)
AutoLF (CR=CR+LF;LF=LF;FF=FF)
AutoCR (CR=CR+LF;LF=LF;FF=CR+FF)
AutoCRLF (CR=CR+LF;LF=LF+CR; FF=CR+FF)
LQ (Letter Quality)
NLQ (Near Letter Quality)
DRAFT (Draft)
Off (nominal character size)
HalfWidth
HalfHeight
HalfWidth
HalfWidthHeight
1 (Courier Upright Port. 10cpi 12pt))
environment, your printer
Value(s) (Qualifier)
Advertisement
Table of Contents
