Using Your Workcentre As A Printer; Customizing Your Print Output - Xerox WorkCentre Xi70c User Manual

Using your WorkCentre as a Printer

To use your WorkCentre as a printer, you must first:
1. Install it completely (see Installation AND Software Installation)
2. Make sure that it is switched on and on-line (the light indicator between
the PC and WorkCentre symbols on the control panel must be ON and
the LCD must show READY TO COPY.
3. Make sure the settings in the printer driver correspond to your
requirements.
4. Make sure that the WorkCentre is selected as the output device for your
print job.
You should now:
1. Open a word processing/desktop publisher application.
2. Open or create the document you wish to print, edit and save it.
3. Select the Print command in your application.
A window showing the WorkCentre print job characteristics opens.
4. Select the paper type, size and source, number of copies, etc. that you
require (see next section for details), make sure that your WorkCentre
is selected as the printer to use and click OK.

Customizing your print output

Always make sure that the Paper Type and Paper Size features in your
printer driver correspond to the type of printing media you intend to use. In
particular, the color calibration in the driver is set specifically for each of the
different types of media handled, so an incorrect setting may result in
degraded output quality.
1. To access the printer driver settings:
Windows
From Control Panel in the Main group of the Program Manager,
select Printers.
Highlight your WorkCentre icon and click on Setup in the File menu.
Windows
Click Start in your Desktop window, click Printers, right-click the
WorkCentre printer driver icon, and click Properties to access the
driver properties.
42
3.1/3.11
95/98