General Messages; Error Codes Printed With The Fax Report; Error Codes In The Transmission Report - Olivetti ANY_WAY User Manual

General messages

Message
EMPTY
ILLEGAL SETTING
FAX NOT WORKING
PRINTER ERROR

ERROR CODES PRINTED WITH THE FAX REPORT

The error codes are printed automatically in the transmission or activity report of the fax.

Error codes in the transmission report

The error codes printed in the transmission report of the fax consist of two digits indicating the cause
of the error and a short description to facilitate understanding.
Code Description
00 OK
02 IMPOSSIBLE
CONNECTION
03 RECEIVER DOES NOT
ANSWER
04 ERR. WHILE
TRANSMITTING
RESEND FROM PAGE nn
06 LINE BUSY
09 STOP PRESSED
14 ERR. WHILE
TRANSMITTING
15 RETRY B/W
Description
• No data available in the memory of the fax.
Is displayed for example when an attempt is made to print reports of fax
message that are not present or when accessing the agenda that has no
information saved in its file.
• Error during setting of the date and time. Repeat entry of the data
checking that the values are valid.
• Visual readout during diagnostics at printer power-on. Indicates a
functional problem on the FAX module; when it is displayed, switch the
printer off and on. If the problem persists, call technical assistance.
• Generic error in the print module. A possible cause may be ink out of the
cartridges installed, no paper in the tray, paper jam, etc.
For further information, check the indicators on the front panel of the
printer; or if connected to a computer, use the status monitor to search
for any error messages.
Cause of the error
No error.
The fax has not detected any
line tone or receives irregular
messages.
The other party has not
answered the call or is not a
fax.
A fault has been detected
during transmission.
"nn" indicates the page
number in which the error has
been detected.
The line is busy.
Transmission has been
interrupted.
Durante la trasmissione del fax
si è verificato un errore oppure
il corrispondente a interrotto la
ricezione del fax.
A color document is being sent
but the recipient is unable to
receive it.
What to do
No action. The fax has been
sent correctly.
Check that the fax is connected
correctly to the telephone line.
Try to send another document.
Check that the number of the
recipient is correct.
Repeat transmission from the
page indicated in the report.
Retry when the line is free.
No action.
Try to resend the faxor make
sure that the recipient intends
to receive the fax.
Rimandare il fax selezionando la
modalità in bianco e nero (B/N).
MAINTENANCE AND TROUBLESHOOTING 69