Error Codes Printed On The Fax Report; Transmission Report Error Codes; Activity Report Error Codes - Olivetti LINEA Office User Manual

ERROR CODES PRINTED ON THE FAX REPORT

Error codes are automatically printed on the fax transmission and activity reports.

Transmission Report Error Codes

The error codes printed on the fax transmission report consist of 2-digits indicating the reason for the error, and a brief
description to help understanding.
Code Message
00 OK
03 RECEIVER DOES NOT
ANSWER
04 ERR. WHILE
TRANSMITTING
RESEND FROM PAGE nn
06 LINE BUSY
09 STOP PRESSED
14 ERR. WHILE
TRANSMITTING
15 RETRY B/W

Activity Report Error Codes

The error codes printed on the fax activity report include both the transmission error codes described above, and the
reception error codes listed below.
The error codes are represented by 2-digits that indicate the reason for the error. For reasons of space, the fax report
gives only the 2-digit code without any description.
Code Message
10 RX ERROR
11 MEMORY FULL
44 Maintenance and Troubleshooting
Description
No error.
The recipient is not replying to the
call or is not a fax.
An anomaly has been detected
during transmission.
"nn" indicates the number of the
page where the error occurred.
The line is busy.
Transmission has been interrupted
During fax transmission an error
has occurred, or the recipient has
interrupted fax reception.
You are trying to send a colour
document but the recipient is not
able to receive it
Description
An error occurred during fax
reception, or the sender interrupted
fax transmission.
The memory available on the fax is
full because many documents have
been received.
Action Required
No action required. The fax has
been sent correctly.
Make sure that the recipient's
number is correct.
Repeat the transmission starting
from the page indicated on the
report.
Retry when the line is free.
No action.
Try to resend the fax or make sure
that the recipient consents to
receiving the fax.
Resend the fax selecting black and
white mode (B/W).
Action Required
Ask sender to resend fax.
Print the documents received and present
in the memory, or delete them, if they are
not wanted.