Replacing The Toner Cartridge And Waste Toner Tank - Olivetti d-Copia 15 Operation Manual

Table of Contents

Advertisement

CHAPTER 3 PREPARATIONS BEFORE USE

2. Replacing the toner cartridge and waste toner tank

When the Add Toner indicator lights, replenish toner. Although several
copies can be made after the indicator lights, it is recommended to
replace the toner cartridge immediately. When the Add Toner indicator
lights, the Toner Disposal indicator will also light. Replace the waste
toner tank after replacing the toner cartridge.
* Replenish toner only when the Add Toner indicator is lit.
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.
1
Open the front cover.
2
Turn the toner cartridge release lever to the right as far as it
will go. The old cartridge will be unlocked.
3-5
3
Pull the old toner cartridge out toward you.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
4
Tap the new toner cartridge on the top 5 or 6 times and
shake it from side to side 8 to 10 times.
5
Fit the new toner cartridge into the copier.
* Align the arrow on the top of the toner cartridge with the
cutout in the copier and then insert the cartridge into the
copier.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents