Table of Contents
Advertisement
1. Assignment through the PROFINET controller
2. Assignment through the EtherCAT Master (assignment through the controller is then no longer
possible)
3. Assignment through a link to the PLC program (assignment through the controller is then no longer
possible)
4. Automatic device startup through topology specification is supported
You can obtain more information from your PROFINET controller
4.1.1 Assignment through the PROFINET controller
In this case, the PROFINET controller assigns the name of the device. You can learn about this from the
manufacturer of your PROFINET controller.
4.1.2 Assignment by the EtherCAT Master
Tick the "get PN station name from ECAT" to activate this.
Fig. 20: "EL663x" tab
The name used in the System Manager tree is then used. In this case, for example, "el6631-test-name".
Fig. 21: TwinCAT tree: assigning a PROFINET station name
4.1.3 Assignment through a link to the PLC program
This is comparable with the DIP switches in the BK9103 and can be carried out via a PLC task. For
activation, "Generate Station Name from Control" must be activated. For clarification, 000 will be appended
to the previous tree name (default: "tcpniodevice").
EL6631-0010
Version: 3.4.0
Commissioning
41
Advertisement
Table of Contents
