Guide Through Documentation; Notes On Information Security - Beckhoff EL6631-0010 Manual

Foreword
1.2

Guide through documentation

Further components of documentation
This documentation describes device-specific content. It is part of the modular
documentation concept for Beckhoff I/O components. For the use and safe operation of the
device / devices described in this documentation, additional cross-product descriptions are
required, which can be found in the following table.
Title
EtherCAT System Documentation (PDF)
I/O Configuration in TwinCAT (PDF)
Design Guide EJ8xxx -
Signal distribution board for
standard EtherCAT plug-in modules (PDF)
Documentation of the
corresponding EtherCAT plug-in modules
EJxxxx
I/O Analog Manual (PDF)
TwinSAFE application example (PDF)
Explosion Protection for Terminal
Systems (PDF)
Control Drawing I/O, CX, CPX (PDF)
Bus Terminals in the Marine Sector (PDF)
Infrastructure for EtherCAT/Ethernet (PDF) Technical recommendations and notes for design,
Software Declarations I/O (PDF)
The documentations can be viewed at and downloaded from the Beckhoff website (www.beckhoff.com) via:
• the "Documentation and Download" area of the respective product page,
• the Download finder,
• the Beckhoff Information System.
1.3

Notes on information security

The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online,
are equipped with security functions that support the secure operation of plants, systems, machines and
networks. Despite the security functions, the creation, implementation and constant updating of a holistic
6
NOTICE
Description
• System overview
• EtherCAT basics
• Cable redundancy
• Hot Connect
• EtherCAT devices configuration
Quick start guide for EtherCAT Box Modules and
EtherCAT P Box modules
Notes on the design of a signal distribution board for
standard EtherCAT plug-in modules.
• Requirements for the signal distribution board
• Backplane mounting guidelines
• Module placement
• Routing guidelines
• Technical data,
• Pinout,
• LEDs,
• Notes on the principle of operation and
• Description of configuration and parameterization
Notes on I/O components with analog in and outputs
Application example
EP7211-0034 - STO Function
Notes on the use of the Beckhoff terminal systems in
hazardous areas according to ATEX and IECEx
Connection diagrams and Ex markings (conform to cFMus)
Notes for operation of the Beckhoff System in the Marine
Sector (DNV GL)
implementation and testing
Open source software declarations for
Beckhoff I/O components
Version: 3.4.0 EL6631-0010