Beckhoff EL6631-0010 Manual page 40

Commissioning
Fig. 18: Representation of the inputs/outputs of the PROFINET I/O device
This representation applies only to the TwinCAT PROFINET device, in the case of a TwinCAT PROFINET
controller, the view will correlate again!
4. General settings
The FrameID can be changed on the "PROFINET Devices" tab. However, the default settings suffice for
normal operation!
Fig. 19: "Device" tab
4.1 PROFINET name assignment
When the EL6631-0010 is shipped it does not have a PROFINET name. It returns an empty string when the
devices are searched.
There are several ways to assign a name to an EL6631-0010:
40 Version: 3.4.0 EL6631-0010