Table of Contents
Advertisement
Operator Function
3.8 TRANSACTION SETUP
▶ This transaction setup menu contains DISPENSE LIMIT, LOW CURRENCY CHECK
EN/DISABLE, FAST CASH and DENOMINATION. By pressing each button, you can
execute each function or enter each sub menu. To go back to the previous screen,
press the CANCEL key in pinpad.
1. DISPENSE LIMIT
This function is used to set the maximum amount of notes that can be dispensed per
transaction. The amount must be a multiple of denomination. And the maximum
dispensed count a transaction must not be over a total of 50 notes.
(eg. You can't input amount over $5000 on DISPENSE LIMIT if the denomination is
set as $100 on ATM.)
<Note!>
In MX4000W, the maximum limit to dispense notes in one transaction physically is 20.
So you can`t input amount over $400 if the denomination is set as $20 on ATM.
2. LOW CURRENCY CHECK EN/DISABLE
This function is used to set the detection of cassette low level (100 bills or less). If
enabled, hardware will report the low condition to the software and the machine will
go to "OUT OF SERVICE" mode under low note condition.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
3-155
Advertisement
Table of Contents
