Operator Function
DEVICE SETUP
▶ This DEVICE SETUP menu contains CDU SETUP, CARD READER SETUP, HALO
MX2800SE.
3-106
LED SETUP, MoniVision and RFID EN/DISABLE. Please press the button on this
menu to go to next screen.
<Note!>
When you change CDU Setup Information, contact the service personnel.
<Note!>
When you want to set CDU in MX4000W, there is no button named as CDU setup.
This is because there is only one cassette in MX4000W. So you do not need to set it.
In MX4000W, if this button is not hidden, there is possibility to set CDU from stable
condition to unknown, not defined state.
<Note!>
RFID EN/DISABLE is only available for MX2600SE, MX5200SE, MX5300SE and
<Note!>
MoniVision is only available for MX2800SE.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU