Chapter 6. QUICK CONFIGURATION
MESSAGE FORMAT
▶ This menu sets up message format to use during communicating with Host.
<Note!>
You can select one of message type to communicate with a data processing company
or bank in this menu (STANDARD1, STANDARD2, STANDARD3 and EPS).
STANDARD 1 is a HYOSUNG message type and STANDARD 2 is a CSP200
message type, STANDARD 3 is Triton 9600 message type and EPS is an extended
CSP200 message type.
When you press NEXT button, if you configured MESSAGE FORMAT to STANDARD
3, then it goes to Section "STANDARD3 OPTION". If not, then it goes to Section
"ROUTING ID".
© Hyosung TNS Inc. All Rights Reserved.
Operator Function
6-19