Table of Contents
Advertisement
Operator Function
SPR SENSOR (except for 4000W)
▶ The SPR SENSOR has the function of testing if all the sensors are in proper working
3-32
condition. The sensors are tested by turning the sensors on and off. If any sensor is
normal the sensor will be displayed as GREEN COLOR. And if any sensor detects an
object or is abnormal, the sensor will be displayed as RED COLOR. Moreover, if any
sensor doesn't exist, the sensor will not be displayed.
Accessing the SENSOR
1. Select DIAGNOSTICS in the OPERATOR FUNCTION.
2. Select AUXILIARY UNIT in the DIAGNOSTICS menu
3. Select SENSOR in the AUXILIARY menu and then select SPR SENSOR in the
SENSOR menu.
© Hyosung TNS Inc. All Rights Reserved.
[The screen except for MX4000W]
[The screen for MX4000W]
Chapter 3. SUPERVISOR MENU
Advertisement
Table of Contents
