Table of Contents
Advertisement
Steps
1. ATM TCP/IP Setup
Before setting up SSL/TLS, confirm you are on a TCP/IP ATM configured for DHCP or static IP as
instructed below.
NOTE: DHCP will enable dynamic allocation of the IP address from the Hercules modem that the ATM is
plugged into. This is preferred as it means changes to the ATM are not required if changes are made to
the Hercules modem. Static IP can be more stable for some older ATMs but requires manual ATM
reconfiguration if the Hercules modem is updated to new addresses (or many other network topology
changes).
a) Use the ATM Operator Menu to navigate to the communication screen using the path listed
below.
ATM Operator Menu > Customer Setup > Select Processor > Communication
NOTE: In order to use SSL/TLS the ATM will need to be capable of TCP/IP communication.
4
Hide quick links:
Advertisement
Table of Contents
