Table of Contents
Advertisement
Operator Function
SURCHARGE MODE
▶ The SURCHARGE MODE contains the EN/DISABLE button for the surcharge warning
3-64
screen and setting the surcharge amount and surcharge owner. When the
SURCHARGE MODE is disabled and also if the data of card contains BIN number that
was entered during installation, the surcharge warning message will not be displayed.
When the SURCHARGE MODE is enabled, the SURCHARGE OWNER and
AMOUNT will be displayed in the surcharge warning screen during transaction. The
factory default is surcharge enabled, surcharge amount is $1.50 and the surcharge
owner is none.
The additional surcharge can be set in ADDITIONAL SURCHARGE MODE.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
Advertisement
Table of Contents
