Operator Function
CHANGE MESSAGE
▶ CHANGE MESSAGE menu has each of 8 sub menus. The displayed menu depends
on which country uses. If you press the WELCOME MESSAGE button, the current
display will be changed into the WELCOME MESSAGE. If you press the EXIT
MESSAGE button, you can change the message on Exit Screen. And you can change
the message in the RECEIPT. If you press the RECEIPT HEADER button, the current
display will be changed into the RECEIPT HEADER. And you can set the receipt
header message in the RECEIPT, If you press the RECEIPT TAIL button, the current
display will be changed into the RECEIPT TAIL. And you can set the receipt tail
message in the RECEIPT. If you press the RECEIPT ADDRESS & PHONE NUMBER
button, it will be changed the RECEIPT ADDRESS & PHONE NUMBER display. You
can set the information about ADDRESS and PHONE NUMBER in the RECEIPT. At
last, the display can go back to the previous menu by pushing the CANCEL key in
pinpad
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
3-41