Table of Contents
Advertisement
Operator Function
COMMUNICATION
▶ This is to set up a type of line to communicate with Host. Select DIALUP or TCP/IP. In
case of setting up DIALUP, communicate with host using modem. And in case of
setting up TCP/IP, communicate with host using LAN.
<Note!>
In case of selecting "IN SERVICE" on OP MAIN, if the value is different from the
original value when entering in OP mode, exit OP and execute reboot.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
3-87
Advertisement
Table of Contents
