Transaction Setup - HYOSUNG MX-4000W Operator's Manual

MX-4000W

5.10 TRANSACTION SETUP

This transaction setup menu contains DISPENSE LIMIT, LOW CURRENCY CHECK EN/DISABLE,
FAST CASH and DENOMINATION. By pressing each button, you can execute each function or enter
each sub menu. To go back to the previous screen, press the CANCEL key in pinpad.
1) DISPENSE LIMIT
This function is used to set the maximum amount of notes that can be dispensed per transaction.
The amount must be a multiple of denomination. And the maximum dispensed count a transaction
must not be over a total of 40
(eg. You can't input amount over $4000 on DISPENSE LIMIT if the denomination is set as $100 on
ATM.)
NOTE: In MX4000W, the maximum limit to dispense notes in one transaction physically is 20.
So you can`t input amount over $400 if the denomination is set as $20 on ATM.
2) LOW CURRENCY CHECK EN/DISABLE
This function is used to set the detection of cassette low level (100 bills or less). If enabled,
hardware will report the low condition to the software and the machine will go to "OUT OF
SERVICE" mode under low note condition.
notes.
5- 148
5. Operator Function