Operator Function
ANTI SKIMMING (NH EMV only)
▶ The ANTI SKIMMING has the functions for testing anti skimming board added to card
reader.
Accessing the CARD SCAN AND IC TEST
1. Select DIAGNOSTICS in the OPERATOR FUNCTION.
2. Select ANTI SKIMMING in the DIAGNOSTICS menu. And if the display is ready, the
screen would show you what is going on inside anti skimming board
3. INITIALIZE button will make the anti skimming board initialized.
4. TIME THRESHOLD button would be used to test the time interval of detecting metal
stuff attached to card reader. If you set threshold time as 10 sec, the anti skimming
board will send the detection signal to S/W to notify it after 10 sec. passes by.
© Hyosung TNS Inc. All Rights Reserved.
Chapter 3. SUPERVISOR MENU
3-39